10 Best Black Diamond Headlamp For Running
Updated on: September 2023
Best Black Diamond Headlamp For Running in 2023
Black Diamond Spot Headlamp, Black, One Size
- One Quad Power LED and one Double Power white LED emit 300 lumens. Max Distances : [High] 80 m; [Low] 16 m. Max Burn Time : [High] 30 H (est.); [Low] 175 H (est.)
- Settings include full strength in proximity and distance modes, dimming, strobe, red night-vision and lock mode
- PowerTap Technology allows instant transitioning between full and dimmed power
- Brightness Memory allows you to turn the light on and off at a chosen brightness without reverting back to full power
- Waterproof; Protected against water immersion down to >1m (3.3 ft) for 30 minutes (IPX 8)
Black Diamond Storm Headlamp, Octane
- One Quad Power LED and one Double Power white LED emit 350 lumens
- Red, green and blue Single Power LEDs for night vision have dimming and strobe settings and activate without cycling through white mode
- Power Tap Technology allows instant transitioning between full and dimmed power
- Settings include full strength in proximity and distance modes, dimming, strobe, red, green and blue night-vision, and lock mode
- Waterproof and dustproof: Sealed housing withstands immersion up to 1m for 30 minutes
Black Diamond Sprinter Headlamp - Smoke Blue
- Very Bright - 1 TriplePower LED with 200 lumens projects a strong, oval beam.
- Red Taillight - With on/off programmability for visibility in urban areas.
- Rechargeable - Powered by a lithium polymer rechargeable battery.
- Multiple Settings - Includes full strength, dimming and strobe.
- IPX4 Storm Proof - Tested to withstand rain and sleet from any angle.
Black Diamond Spot325 Headlamp Aqua OneSize
- PowerTapƒ,› Technology allows instant transitioning between full and dimmed power. Compact, low-profile design uses three AAA batteries, included. Brightness Memory allows you to turn the light on and off at a chosen brightness without reverting back to full or mid-power.
- Settings include full strength in proximity and distance modes, dimming, strobe, red night-vision and lock mode. Multifaceted optical lens design. IPX8: Waterproof-Tested to operate at least 1.1 meters underwater for 30 minutes. If submerged, water may enter the battery compartment and it will still operate; it should be completely dried out after use in wet conditions."".
- LumensAÿ:AÿAÿ[High] 325: [Medium] 160: [Low] 6. Weight With BatteriesAÿ:AÿAÿ86g (3oz). Max Distances:AÿAÿ[High] 80 m: [Medium] 60 m: [Low] 8 m.
- Max Burn Time:AÿAÿ[High] 4 H: [Medium] 8 H: [Low] 200 H. Imported. .
Black Diamond Storm 400 Headlamp, Unisex, One Size (400 Lumens) (Graphite)
- Emits up to 400 lumens on max setting. PowerTap Technology allows instant transitioning between full and dimmed power with extremely bright LED lights.
- Brightness Memory allows you to turn the light on the headlamp on and off at a chosen brightness without reverting back to full power. Regulated for constant light output
- Compact, low-profile design uses four AAA batteries. Settings include full strength in proximity and distance modes, dimming, strobe, red, green and blue night-vision, and lock mode
- Multifaceted optical lens design. Waterproof and dustproof: Sealed housing withstands immersion over 1m for 30 minutes (IPX67)
- Lumens : [High] 400: [Medium] 160: [Low] 8: Weight With Batteries : 120 g (4.2 oz) Max Distances : [High] 100 m; [Low] 9 m Max Burn Time : High 5 hours, Low 200 hours (ANSI FL1 Standard); Reserve 42 hours IPX Rating : IP 67 Batteries : 4 AAA (included)
Black Diamond Cosmo Headlamp, Aluminum, One Size
- One Triple Power LED and one Double Power white LED emit 200 lumens
- Red night vision has dimming and strobe modes and activates without cycling through the white mode
- Sleek, low-profile design uses three AAA batteries
- Settings include proximity and distance modes, dimming, strobe, red night-vision and lock mode
- Waterproof: Protected against water immersion down to >1m (3.3 ft) for 30 minutes (IPX 8)
Black Diamond Revolt Headlamp, Denim
- One Triple Power LED and 1 Double Power LED can combine to emit up to 300 lumens
- One Double Power Red LED for night vision has proximity and strobe settings
- Low-profile design uses three Black Diamond AAA Rechargeable Batteries or standard alkaline or lithium batteries
- Programmable Brightness Memory gives you the option to set the light's brightness when first turned on
- Three-level power meter shows remaining battery life for three seconds after switching on headlamp
Black Diamond Astro Headlamp, Octane, One Size
- One Triple Power LED emit 150 lumens
- Sleek, low-profile le design uses three AAA batteries
- Settings include full strength, dimming and strobe
- Brightness Memory allows you to turn the light on and off at a chosen brightness without reverting back to full power
- Stormproof: withstands rain and sleet from any angle (IPX 4)
2 Pack of Rechargeable Headlamp, 500 Lumens White Cree LED Head lamp with Red light and Motion Sensor Switch, Perfect for Running, Hiking, Lightweight, Waterproof, Adjustable Headband, 5 Display Modes
- ULTRA BRIGHT- Class-leading illumination with our 500 lumens Cree LED, providing five lighting modes. Intense white and red lights encompassed in a 45° rotating enclosure ensures clear vision in the dark. The inbuilt SOS and strobe modes are designed for safety.
- MOTION SENSOR- Operate the headlamp by simply waving your hand under the motion sensor mode to turn it on or off. Designed with convenience in mind to avoid accidental eye contact with another person.
- LIGHTWEIGHT AND COMFORTABLE- Suitable for running with a weight under 3.5oz and an adjustable ergonomically designed elastic headband, resulting in a secure yet comfortable fit for long-wearing sessions.
- HIGH CAPACITY BATTERY WITH EASY CHARGING- USB cable included for direct charging capability. The inbuilt rechargeable battery offers over 2.5 hours of high brightness use per charge (500 lumens white light mode).
- PACKAGE INCLUDES - 2 x headlamp, 2 x headband, 2 x USB cable, 1 x user manual
Black Diamond Storm Headlamp, Aluminum
- One Quad Power LED and one Double Power white LED emit 350 lumens
- Red, green and blue Single Power LEDs for night vision have dimming and strobe settings and activate without cycling through white mode
- Power Tap Technology allows instant transitioning between full and dimmed power
- Settings include full strength in proximity and distance modes, dimming, strobe, red, green and blue night-vision, and lock mode
- Waterproof and dustproof: Sealed housing withstands immersion up to 1m for 30 minutes
How to Change the Headlamp Bulb on Your Ford Windstar
This is a quick and easy repair that will save you lots of dollars over taking the car to your repair shop. It's faster, easier, and far cheaper if you do it yourself.
Tools Needed: A flat bladed screwdriver and a flashlight
Supplies Needed: One headlamp bulb.
Time for this Repair: About ten minutes
Cost of this Repair: $10-$22
Step One: Acquire the Lamp
Visit your local auto parts store and take a look in the Light Bulbs section. You'll find a wide selection of headlamps, tail lights, stop lights, just about any kind of lights you can imagine being used on a car. It can be daunting, but look around the section and see if you can find either a book on light bulbs or a digital "light bulb finder" mounted to one of the shelves. Look up the right year for your Windstar, then look under Ford, and under Windstar, and, finally, under Headlamp. You'll see a code number that matches the packaged light bulbs on the shelf. My '01 Windstar uses the Sylvania number 9007 - yours probably will, too.
Now, you have a choice here. The replacement lamp costs about ten dollars. If you're feeling flush and haven't replaced either headlamp before, buy TWO of them and do them both at the same time. Think about it: both lamps have been burning for exactly the same amount of time. If one lamp went, the other will soon. If you don't have the extra ten dollars right now, just buy the one and we'll cross the other headlamp bridge when we get to it.
Step Two: Remove the Old Lamp
It used to be that a headlight looked rather like a floodlight bulb, and when you replaced it, you replaced that whole massive piece of glass. Today's headlamp replacements look more like the filament inside the lamp itself.
IMPORTANT:DO NOT REMOVE THE NEW LAMP FROM THE PACKAGE YET!!! Your new headlamp burns very, very hot. So hot, in fact, that the grease from your fingers on the glass bulb will cause it to shatter when switched on. The best way to avoid contaminating to lamp is to leave it in the package until you need it.
Open the hood of your Windstar. You'll find the hood release lever on the lower left side of the dashboard. There's a second release under the center of the hood itself. When you open the hood, make sure you place the prop in the hole marked by the arrow on the hood's underside: you don't want to dent it.
The headlight assemblies extend through the grillwork and are accessible from inside the engine compartment. Draw an imaginary line from the front of the headlight to where it passes through the grille and look back there. You might need a flashlight. What you're looking for is an electrical plug about an inch in diameter with a couple of heavy wires leading to it. That plug sticks into the backside of the headlight.
Once you've located the plug, feel with your fingers around its base and you'll find a plastic ring about two inches in diameter. This is the retaining ring that holds the lamp into the headlight assembly.
Turn this retaining ring about a quarter turn counter-clockwise and you'll feel it come loose.
Pull the retaining ring and the electrical plug straight back, towards the windshield, and you'll see that it comes out. Take a look: that's the old headlamp.
The lamp has a rounded side and a flat side. On the flat side there's a heavy plastic rectangle locking tab with a smaller rectangular cut-out in it. There's a rectangular lug that sticks up inside the cut-out. The plastic lug fits inside the locking tab, which holds the lamp securely against the socket of the plug.
Use your flat-bladed screwdriver to carefully lift the edge of the rectangular locking tab until you pop the lug out from under it. A word of caution here: the heat of the lamp can cause the locking tab to become brittle. I was too aggressive with my screwdriver and broke it right off. If you do that, it's okay, but try very hard to not break it. It's not an easily replaceable piece.
With the lug free of the plastic locking tab, you can now pull the bulb straight out of the socket. It's okay to touch the glass on this one; it's going into the recycling bin.
Before you toss it, though, take a look inside the glass bulb part. You'll see two little springs which, when powered up, glow with an amazing intensity. Look carefully: one of those springs will be broken. That's your lamp failure. Now you can toss that thing in the recycling bin.
Make sure that the retaining ring is still on the wires, behind the socket. It's important that it stays on those wires, as, when you go to plug the new lamp in, you'll need to lock it in place with that ring.
Step Three: Replace the Lamp
Now you can open the package on your new lamp.
IMPORTANT:BE VERY CAREFUL TO NOT TOUCH THE GLASS PART. Again, these burn with a temperature that is so high just the natural oil from your skin, if smeared on the glass bulb by your touching it, will create a hot spot and cause the lamp to shatter. If you think you might have touched the glass part, polish the glass with a soft, dry cloth. THIS IS VERY IMPORTANT!
As noted before, the base of the lamp has a rounded side and a flat side. It can only fit into the socket one way. Push it into the socket until the little plastic lug snaps under the locking tab.
From here on, handle the lamp by the electrical plug, not the lamp itself.
Insert the lamp/plug back into the back of the headlight assembly. Turn it slightly if you have to until the plug lies flat and firm against the back of the headlight. Again, it will only lie flat one way. If you can wobble it, it's not right. Turn it until it fits firm against the back of the headlight.
Slide the plastic retaining ring over the wires and over the plug. Pressing it firmly against the back of the headlight, turn it clockwise until it latches into place.
Step Four: Testing
Go turn on the headlights. The new lamp should illuminate exactly like the other headlight. Test the high beams, too; the two headlights should light up exactly the same. If they don't it's because your replacement lamp is in upside down: go back and make sure it sits flush against the back of the headlight assembly. Test them again.
If you've purchased two lamps, now is the time to replace the other one. It's exactly the same procedure.
Make sure and toss your used lamps in the recycling bin: don't throw them out.
By replacing your headlamps yourself, you've saved yourself a trip to the repair shop, as much as $50 in repair costs, and carved another notch in your "things I can do myself" belt!
